Advertisement
Advertisement
Table of Contents
Related Manuals for JMC BT6 Series
Summary of Contents for JMC BT6 Series
- Page 1 Bluetooth Helmet Headset BT6 Series Installation & Operation Instructions...
-
Page 2: Electromagnetic Interference/Compatibility
MEDICAL DEVICES HEARING AIDS The new BT6 headset from JMC is the most versatile, feature packed and Some devices may interfere with some hearing aids. In the event of such best performing Bluetooth headset that we have ever offered for the motor- interference, you may want to consult with your hearing aid manufacturer to cycle, SxS, UTV or ATV powersports environment. - Page 3 • To LINK to CELL PHONE when in pairing mode, instruct the cell phone to search for devices, choose JMC BT6 to link together. • HELMET TO HELMET linking is SUCCESSFUL when both headsets are flashing blue and the intercom buttons are illuminated green.
-
Page 4: Headset Features
ABORT. Then scroll down and SELECT JMC BT6. As soon as the rider headset is paired, the 10. Refer to section 5 of this operation manual for proper operation of all BT6 headset icon #1 will show up in the top left corner of the screen. - Page 5 (Bluetooth section) to search for fully illuminate. devices, choose JMC BT6 on the cell phone screen to link together and then make any additional linking option choices on the co-rider's cell 2. Then TURN-ON the rider’s BT6 headset by pressing and holding the phone screen.
- Page 6 9. Installation For Most Modular Flip-Up, Open-Face & Full-Face Style Helmets IMPORTANT NOTE: Modern day helmets can present special challenges for wireless headset installation. If you do not feel you are up to the task, you may send your “un-modified” helmet to our factory in Tucson and we will perform the installation for a nominal fee. 1.
- Page 7 2. Position the boom microphone on the left in side of the helmet so that the microphone lines up with the wearer’s mouth. Then remove the backing from the tape on the pre-gummed mounting square and press it into place inside the helmet. (Note: this area should be cleaned with rubbing alcohol prior to sticking the microphone in place.) If it is a fixed full-face style helmet, use the alternate microphone to mount in the forward inside chin-bar position and secure with included Velcro pads.
- Page 8 6. Slide the BT6 headset mounting base into the proper position on the left bottom edge of the helmet, and secure into place using the spring-loaded metal clip or the double backed tape sections provided. 7. Plug the microphone wire back into the headset wire harness and then plug the headset harness into the bottom of the BT6 control head. Using the enclosed wooden tool, carefully push the speaker &...
-
Page 9: Warranty And Repair Information
WARRANTY AND REPAIR INFORMATION TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty, and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned, on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.
Need help?
Do you have a question about the BT6 Series and is the answer not in the manual?
Questions and answers