Before Operating; Setting The Clock; Microwave Power Level - Sharp R-211D Operation Manual

Table of Contents

Advertisement

Plug in the oven. The oven display will display: "0:00", an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode.
To set the clock, see below.
Your oven has a 24 hour clock mode.
1. Press the SET CLOCK key
2. Press the time keys and enter the current time. Enter the hours by pressing the 10 min. key and enter the
minutes by pressing the 1 min. and 10 sec. keys.
3. Press the SET CLOCK key
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show "0:00" when cooking is complete.
• To check the time of day during a cooking process, press SET CLOCK key and the LED will display the time of
• In the process of clock setting, if the STOP/CLEAR key is pressed or if there is no operation within 1 minute,
the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" - after
the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.
Power Level
Press the POWER LEVEL
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
(DEFROST)
LOW
Generally the following recommendations apply:
100P/ 90P - (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
80P/ 70P - (MEDIUM HIGH) used for longer cooking of
dense foods such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as sponge cakes.
At this reduced setting, the food will cook evenly
without over cooking at the sides.
nish clock setting.
ect the cooking process.
Display
key
(Percentage)
x1
100P
x2
90P
x3
80P
x4
70P
x5
60P
x6
50P
x7
40P
x8
30P
x9
20P
x10
10P
x11
0P
6
BEFORE OPERATION

SETTING THE CLOCK

ash.

MICROWAVE POWER LEVEL

• Your oven has 11 power levels, as shown.
• To change the power level for cooking, press
the POWER LEVEL key until the display
indicates the desired level. Press the START
key to start the oven.
• To check the power level during cooking,
press the POWER LEVEL key. As long as your
finger is pressing the POWER LEVEL key
the power level will be displayed. The oven
continues to count down although the display
will show the power level.
• If "0P" is selected, the oven will work with the
fan but no power. You can use this level to
remove the odour.
60P/ 50P - (MEDIUM) for dense foods which require a
long cooking time when cooked conventionally, e.g.
beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
40P/ 30P - (MEDIUM LOW) to defrost, select this
power setting, to ensure that the dish defrosts evenly.
This setting is also ideal for simmering rice, pasta,
dumplings and cooking egg custard.
20P/ 10P - (LOW) For gentle defrosting, e.g. cream
or pastry.

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-211dwR-211db

Table of Contents