NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Prerequisites
Procedure
1. Disconnect the power cable and the data cable from the hard-drive assembly.
2. Remove the two screws (#6-32xL6.35) that secure the hard-drive assembly to the drive cage.
3. Slide the hard-drive assembly and lift it off the drive cage.
18
Removing the 3.5-inch hard drive
Removing the 3.5-inch hard drive
computer. After working inside your computer, follow the instructions in
10
After
www.dell.com/