NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
3. Follow the procedure from step 1 to step 4 in
Procedure
1. Locate the wireless card on the system board.
2. Remove the screw (M2xL3.5) that secures the wireless card to the system board.
3. Slide and remove the wireless-card bracket from the wireless card.
4. Disconnect the antenna cables from the wireless card.
5. Slide and remove the wireless card from the wireless-card slot.
Removing the wireless card
computer. After working inside your computer, follow the instructions in
"Removing the optical
drive".
Removing the wireless card
18
After
www.dell.com/
31