Depth Range - Automatic - Lowrance X100C Installation And Operation Instructions Manual

At left, Sonar Page menu with Depth Cursor command selected. At
right, sonar chart with the depth cursor active. The line indicates the
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
At left, Sonar Page menu with Depth Range command selected. At
school of fish is 31.91 feet deep.
right, the Depth Range Control Scale.
Cursor line
|↓ to
MENU D
EPTH
.
EXIT
|↓ to
MENU D
EPTH
50
Depth box
| .
C ENT
URSOR
| .
R ENT
ANGE