Spektrum S100 Instruction Manual page 6

2. Connect the battery to the appropriate charge port.
3. Connect the battery balance lead, if available,
to the charger balance port. Ensure the balance
lead is positioned fully to the left side of the port.
4. Press the Battery Type button until the correct
battery type is shown on the display.
5. Press the Output Current button until the desired
charging current is shown on the display.
6. Press and release the Start/Stop button to
begin charging.
During The Charging Process
While the battery is charging the Percentage
Indicator shows the battery charge level, as shown
by the following table:
Battery Charge Indicator Levels
Indicator Bars
20 flashing
20 solid
20 solid with 40 flashing
20–40 solid
20–40 solid with 60 flashing
20–60 solid
20–60 solid with 80 flashing
20–80 solid
20–80 solid with 100 flashing
20–100 solid
When the fast charge cycle is complete, the
charger will beep twice and the display will
show the Charge Complete icon. The charger is
balancing the battery cells.
Stopping the charging cycle
charger if you notice any irregularities (like a
swollen battery) during charging.
To stop the charging cycle, press and release the
Start/Stop button.
When charging is complete:
The charger will beep twice to indicate the fast
charging is done. Once the charger is finished
balancing the battery's cells it will double beep twice.
Charge %
1. The main screen will display the Charge
<10%
2. Disconnect the battery from the charger.
10–20%
20–30%
30–40%
40–50%
50–60%
60–70%
70–80%
80–90%
90–100%
WARNING: Always stop the charging
cycle or remove power supplied to the
Complete icon.