Advertisement
Fuel Management
The Fuel Management menu allows you to maintain and configure fuel
flow and fuel consumption.
To get to the Fuel Management menu, press
press
. Highlight
ENT
Fuel Used Location
If there is more than one tank on your vessel, the Fuel Used Location
scroll box allows you to select the tank you want to monitor or config-
ure. It can support up to three tank locations: Port, Center and Star-
board.
1. If you have more than one tank and want to check other tanks, high-
light
F
U
UEL
SED
2. Use ↓ ↑ to select a different tank location and press
Fuel Added
The Fuel Added dialog box is used to enter the amount of fuel added to
the tank after you have added fuel to your vessel.
1. To input the amount of fuel added to the tank, highlight
and press
ENT
2. Use ↑ ↓ to enter the first digit, the press → to move to the next num-
ber. Repeat those steps until the correct amount of fuel added has been
entered, then press
Fuel Management highlighted on the NMEA 2000 menu (left).
Add Fuel
When using the EP-10 Fuel Flow on your vessel, you must use either
the Add Fuel or Fill Tank commands when fuel is added to the tank. If
adding fuel, but not filling the tank, use the
F
M
UEL
ANAGEMENT
and press
L
OCATION
.
.
ENT
Fuel Management menu (right).
MENU
and press
ENT
.
ENT
A
DD
8
, select
NMEA 2000
.
.
ENT
F
option.
F
UEL
and
A
UEL
DDED
Advertisement
