Advertisement
1. Highlight
N
2. Press → to Fluid Level, press
,
or
H
3
F
ALF
QTR
ULL
.
ENT
Num Pts menu with 5-point calibration selected (left). Half level se-
lected on Fluid Level menu (center). Calibration Done window (right).
3. Press ← to
will appear confirming calibration has been completed.
4. Press
|
ENT
EXIT
Advanced Options
When Advanced Options is selected, the Device Data window at the
bottom of the Device Configuration menu will be replaced with a pair of
categories: Instance and Restore Defaults.
Restore Defaults selected (left). Restore Defaults Confirmation
message (center). The Instance dialog box (right).
Restore Defaults
The Restore Defaults command gives you the option of resetting all the
unit's settings back to factory defaults.
1. From the Device Configuration menu, you can restore the unit's de-
fault settings by selecting
2. Press ↓ → to
confirmation message. To confirm the configuration, press ←|
, press
P
ENT
UM
TS
) that corresponds with your tank's fuel level and press
and press
C
ALIBRATE
|
to return to the Buss Setup menu.
EXIT
A
DVANCED
R
D
ESTORE
EFAULTS
and select
. Press
5
, then select the level (
ENT
. The Calibration Done window
ENT
and pressing
O
PTIONS
and press
6
.
ENT
ENT
, which will launch a
ENT
,
,
E
1
MPTY
QTR
.
.
ENT
Advertisement
