Safety Instructions; Technical Data - BorMann BWR5121 User Manual

EN

Safety instructions

WARNING
This Hydraulic Jack is not designed for professional use.
It is designed for lifting and lowering a vehicle load.
The bottle jack should not be used as a stand to hold load for any prolonged period. Use the safety arm to support weight.
Failure to heed this warning may result in loss of load, damage to jack and/or jack failure resulting in personal injury or property damage.
-Please make sure to read and understand these instructions before operating motorcycle jack.
-Do not exceed the 400kg load limit.
-Keep hands clear of all moving parts when operating jack.
-Release relief valve slowly when lowering motorcycle.
-Do not place body or body parts under the raised motorcycle.
-Do not use jack on inclined surfaces, use on a smooth, level and stable surface.
-Secure motorcycle with tight strap hooked to the jack frame before lifting.
-Do not start the motorcycle while it is loaded on the jack.
-Lift motorcycle to the minimum required height for working on motorcycle.
-Replace jack with vehicle stands if supporting motorcycle for prolonged periods.

Technical data

Working load limit:
Height lowered:
Height raised:
Dimensions:
Additional features:
Assembly
Safety bar
Ratchet straps
2
400kg
140mm
430mm
920 X 440 X 155mm
4 locking positions
3600 locking swivel castors
Lifting base
Hydraulic ram
Frame & arm
WWW.BORMANNTOOLS.COM
* The manufacturer reserves the right to make minor changes to product design and technical specifications with-
out prior notice unless these changes significantly affect the performance and safety of the products. The parts
described / illustrated in the pages of the manual that you hold in your hands may also concern other models of
the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or
replacement work, including maintenance and special adjustments, must only be carried out by technicians of the
authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment
may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for
injuries and damages resulting from the use of non-conforming equipment.
1. Insert the Hydraulic ram head into the Lifting Frame then secure ram base
to the lift base with M8x20 screws.
2. Secure Safety Bar with M8 NUTS.
Allen key
M8 x 20 screws
M8 nuts
Handle