Navigation - Lowrance 100 Installation And Operation Instructions Manual

Edit Name
You can assign a name to each waypoint. The name
can have up to eight characters. To do this, first select
the waypoint that you wish to name, then choose "EDIT
NAME" from the waypoint menu. A screen similar to
the one at right appears.
Press the up or down arrow keys to select the first
letter in the name. Press the right arrow key to high-
light the next position in the name. Repeat this se-
quence until you've entered all of the letters in the way-
point name. Press the ENT key to accept this name, the WPT key to
erase all characters in the name, or the EXIT key to leave this screen
without saving any changes.
Edit Icon
To change the icon assigned to a waypoint, first select
the waypoint, then choose "EDIT SYMBOL". The screen
at right appears. Use the arrow keys to select the icon
that you want to assign to the waypoint, then press the
ENT key. The waypoint now has the new icon.

NAVIGATION

The AirMap 100 makes it easy to navigate to any location. All you have to
do is select the location from the database, then highlight the "GO TO"
label on the waypoint screen and press the right arrow key. The unit im-
mediately shows navigation information to the waypoint
on all navigation, map, and windows screens.
In this example, Halliburton field in Duncan, Oklahoma
was recalled. It's 142 nautical miles from our present
position on a bearing of 222°. To do this, we simply
pressed the WPT key, selected the AIRPORT data-
base, then selected Haliburton field. Next, the "GO TO
AIRPORT" label was selected and the right arrow key
pressed. The unit returned to the mapping screen that
was in use before we pressed the WPT key, (shown at
right) which happened to be MAP-2.
47