Reprogram Boxes - Lowrance 100 Installation And Operation Instructions Manual

Reprogram Boxes

The digital boxes on MAP 2 and 3 and both NAV screens
can be reprogrammed, changing the informations
shown by the boxes.
To customize a screen, first switch to the screen that
you want to customize. Map-2 (shown at right) is used
in this example. Next, press the MENU key, then select
the "Reprogram Boxes" menu. The screen shown be-
low left appears.
This is the MAP-2 edit screen. The "BRG" box near the left corner flashes,
which means it's ready for change. If you don't want to change this box,
simply press the left or right arrow key to move to the box that you do want
to change. In this example, we will change the bearing (BRG) box to
ground speed (GS). To do this, simply press the up or down arrow key
while the box is flashing. The box changes each time the arrow key is
pressed. When the desired box appears, then you can change another
box or save your changes by pressing the ENT key. If you want to leave
this screen without saving the changes, simply press the EXIT key. In this
If you finish selecting windows before filling the group
with windows, press the ENT key. To leave the
reprogramming menu without saving the changes,
simply press the EXIT key. In this example, the finished
group "B" looks like the one at right.
37