Milwaukee MXF C User Manual page 6

TECHNICAL DATA
Voltage range
Quick charge current
Weight according to EPTA-Procedure 01/2014
Recommended ambient charging temperature
WARNING! Read all safety warnings, instructions,
illustrations, and specifi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY CHARGER SAFETY WARNINGS
Do not dispose of used battery packs in the household refuse
or by burning them. MILWAUKEE distributors off er to retrieve
old batteries to protect our environment.
Only MXF CP203 and MXF C406 battery packs can be
charged with this charger.
Do not try to charge non-rechargeable battery packs with this
charger.
Do not store the battery pack together with metal objects (short
circuit risk).
No metal parts must be allowed to enter the battery section of
the charger (short circuit risk).
Never break open battery packs and chargers, and store them
only in dry rooms. Keep battery packs and chargers dry at all
times.
The battery clamps of the charger are fed by the mains supply.
Do not touch the product with conducting objects.
Never charge a damaged battery pack. Replace a damaged
battery pack with a new one.
Before use, check the product, cable, and plug for any
damages or material fatigue. Repairs should only be carried
out by authorised service centres.
Use only MXF System chargers for charging MXF System
battery packs. Do not use battery packs from other systems.
The product is not intended to be used or cleaned by persons
with reduced physical, sensory or mental capabilities, or
persons with lack of experience or knowledge, unless they
have been given instructions concerning the safe use of the
product by a person legally responsible for their safety. They
should be supervised while using the product. Children must
not use, clean or play with the product, which when not in use
should be secured out of their reach.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
product, battery pack, or charger in fl uid or allow fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
WARNING! The product contains a lithium
button or coin cell battery. A new or used battery
can cause severe internal burns and can lead to
death in as little as 2 hours if swallowed or enters
the body. Always secure the battery cover. If it
6 English
does not close securely, stop using the product, remove the
batteries, and keep it away from children. If you think batteries
may have been swallowed or entered the body, seek immediate
medical attention.
SPECIFIED CONDITIONS OF USE
The charger charges MXF CP203 and MXF XC406
MILWAUKEE lithium-ion battery packs.
Do not use the product for any other purpose.
MAINS CONNECTION
Connect the product only to single-phase AC current and only
to the system voltage indicated on the rating plate. It is possible
to connect the product to sockets without an earthing contact
because the design conforms to safety class II.
COMPATIBLE BATTERY PACKS
Battery pack MXF CP203
Cell Type
Voltage
Capacity
No. of cells
Charging time
(approximate)
LITHIUM-ION BATTERIES
The rechargeable batteries are partially charged. The LED on
the battery indicates the state of charge.
If the battery pack is not used for long periods, the rechargeable
battery switches to a non-operative state.
When fully discharged, the rechargeable battery turns off
automatically (depth discharge is not possible).
Under extreme circumstances, the internal temperature of the
battery pack could become too high. Excessive temperatures
causes the battery pack to shut down. Charge the battery pack
to reset it.
The state of charge can be read by pressing the button on the
battery pack. The battery pack can be left in the power tool
while the reading is taken but it must be turned off at least one
minute beforehand, otherwise, the display will be inaccurate.
The number of LEDs illuminated indicates the state of charge.
A fl ashing LED indicates a maximum power reserve of 10%.
If the power tool fails to work after inserting the battery pack,
recharge the battery pack. The displays on the battery and
charger provide information about the condition of the battery.
In low temperatures, work may continue with reduced
performance.
6
MXF C
72 V
4.5 A
3.27 ± 0.1 kg
+5 – +40 °C
MXF XC406
Lithium-ion
72 V
≤ 3.0 Ah ≤ 6.0 Ah
20 2 x 20
55 minutes 90 minutes