Page 1
OPERATOR'S MANUAL Cat. No. M12 TC Cat. No. M12B2 M12B3 Cat. No. M12B4 M12B6 New batteries must be charged before first use. M12™ COMPACT CHARGER AND POWER SOURCE M12™ REDLITHIUM-ION BATTERY PACKS WARNING To reduce the risk of injury, user must read and understand operator's manual.
1. SAVE THESE INSTRUCTIONS - THIS MANUAL turer CONTAINS IMPORTANT SAFETY AND OPER- ® ATING INSTRUCTIONS FOR THE MILWAUKEE personal injury. 12. UNPLUG CHARGER when not in use. Remove M12™ COMPACT CHARGER AND POW- ER SOURCE CAT. NO.
100 Wh. Generally, Li-Ion batteries rated 100 Volts .............. 12 DC Wh or less are “excepted” from certain Class 9 DG Battery Cat. No........... M12B3 requirements. Always check compliance of Li-Ion Volts .............. 12 DC battery consignments against the current regulations Battery Cat.
Page 4
Remove the battery pack from the tool for charging not in use. Do not store battery packs in the M12™ ® when convenient for you and your job. MILWAUKEE Compact Charger and Power Source. batteries do not develop a "memory" when charged...
Page 5
ASSEMBLY Recharge only with the charger WARNING manual supplied with your charger and battery. Using with Heated Gear To insert the battery, slide the pack into the body of the battery holder. Make sure it latches securely into place. Insert the power cable (from inside the battery holder pocket) into the power cable port on the battery holder.