Toshiba RB-N105S-G Installation Manual

Accessory part.
Wireless adapter
No.
1 Wireless adapter
2
Connection cable
TYPE B
3 SCREW : M4X25
4 SCREW : M4X12
*The number of parts may differ by model.
"The Wireless adapter must be installed, maintained, repaired and removed by a qualified
installer or qualified service person."
Installation position (Inside AC unit)
High - Wall type A
Installation position (Outside AC unit)
Console chassis
How to install Wireless adapter.
High - Wall type A (Inside AC unit)
1. Open air inlet grille and cover for controller.
Cover for controller
2. Open Wireless adapter for connect terminal.
Connect terminal
Remove screw
remove cover
3. Open cover place the controller and connect communication cable from AC and
close cover.
Cover of adapter
no need fix screw
INSTALLATION MANUAL
Part Name RB-N105S-G
1
TYPE B
-
*2
*1
TYPE B
Caution : Turn off power supply before installation
TYPE B Wire out position
Communication cable
SETUP button
Initial connection
RB-N106S-G
to Wi-Fi router
1
1
RESET button
*2
For system reset
*1
High - Wall type B
High - Wall type C
High - Wall type B (Inside AC unit)
1. Open air inlet grille and terminal cover.
Air inlet grille Screw
2. Open Wireless adapter for connect terminal.
Connect terminal
Remove screw
remove cover
Fix by screw
3. Place Wireless adapter to fixing position and connect communication cable from
AC and close cover.
1120490206
WIRELESS LED
Show during A/C add
step and sending
signal to A/C
LINK LED
Show during
connecting process
TYPE B
POWER LED
Show for
Power On
TYPE B
Front panel
Cord clamp
Screws
Terminal cover
Wire out position
TYPE B
Communication
cable
Fix by screw
Cover of adapter no need
fix screw
- EN -