Bosch Kiox BUI330 Original Operating Instructions page 22

English – 6
eSuspension (optional)
eSuspension is the integration of electronic shock absorp-
tion and suspension elements into the eBike system. You
can use the Quick Menu to select predefined settings for the
eSuspension system.
For details of these settings, please refer to the operating in-
structions provided by the eSuspension manufacturer.
eSuspension is only available in combination with the Kiox
on-board computer and can only be used with the BDU450
CX, BDU480 CX and BDU490P drive units.
Lock (premium function)
The Lock function is available to purchase from the <Shop>
in the eBike Connect app. Once the Lock function is
switched on by disconnecting the on-board computer, the
eBike drive unit assistance is deactivated. It can only then be
activated using the on-board computer belonging to the
eBike.
Detailed operating instructions can be found online at
www.Bosch‑eBike.com/Kiox‑manual.
Software updates
Software updates are transferred to the on-board computer
in the background of the app as soon as it is connected to
the app. When an update is complete, this will be displayed
the next three times the on-board computer is restarted and
can then be started. The eBike should not be used during the
update.
Alternatively, you can check in the <Sys settings> whether
an update is available and then start it.
Powering external devices via the USB port
The USB port can be used to operate or charge most devices
that can be powered via USB (e.g. various mobile phones).
Charging requires the on-board computer to be mounted
and a sufficiently charged battery to be inserted in the eBike.
Open the protective cap (17) for the USB port on the on-
board computer. Use a Micro-A – Micro-B USB charging
cable (available from your Bosch eBike dealer) to connect
the USB port on the external device to the USB port (6) on
the on-board computer.
Once the electrical load has been disconnected, the USB
port must be carefully resealed with the protective cap (17).
USB connections are not waterproof. When cycling in
u
the rain, do not connect any external devices and
make sure that the USB port is fully sealed by the pro-
tective cover (17).
Important: If electrical loads are connected, this can affect
the range of the eBike.
1 270 020 XBK | (24.11.2021) Bosch eBike Systems