Maxcom MM918 STRONG DualSIM User Manual page 14

3. When the battery is fully charged (battery
indicator bars will stop blinking), unplug the
charger from the power outlet and from the
phone.
Note:
o Make sure the battery is correctly installed before
starting the charging process.
o Never remove the battery while charging - doing
so could damage the phone.
o If the battery voltage is too low for your phone to
work, a message will appear about expected
powering off and next your phone will
automatically switch off.
o If the battery is totally discharged (e.g. Due to
keeping on a radio or torch) and you plug in the
charger, you should wait several minutes before
a charging icon appears.
14