Polaris RIDE COMMAND+ User Manual page 26

RIDE COMMAND+ TROUBLESHOOTING
SYMPTOM
EPS (Electronic
Power Steering)
warning lamp (in
vehicle
instrument
cluster)
illuminating
when Plug-In is
connected to
vehicle
If you are unable to resolve the issue, reach out to ridecommand.polaris.
com/support or our Customer Support Center via phone at 1 (800) 765-2747 for
RIDE COMMAND/RIDE COMMAND+ questions.
24
POSSIBLE LED
STATUS
REASON
Warning
lamps will
be
illuminated
Potential
in vehicle
incompati-
gauge
ble Plug-In
cluster.
device
(baud rate)
GPS LED:
N/A
Cellular
LED: N/A
ACTION TO RESOLVE
ISSUE
1. Turn the key to ignition
OFF position and
disconnect Plug-In.
2. With the Plug-In
disconnected, turn key to
ignition ON and start the
vehicle and see if EPS
fault appears.
If the EPS fault appears, refer
to the Owner's Manual for
EPS Warning Lamp details,
and contact your dealer if
repairs are required.
If EPS fault does not appear,
the Plug-In installed on the
vehicle is not compatible,
replace with the correct
Plug-In for the vehicle.
Refer to ridecommand.
polaris.com/ridecommand+
for vehicle compatibility and
accessory kit fit.