Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions
2.1
Operation
This section is going to brief on the settings of the touch monitor and how to troubleshoot
the device in the event of a trouble/failure.
2.1.1 Power
When a 12V DC power supply is plugged into the power jack of the touch monitor, the
power indicator will turn solid red and the monitor will get into the sleep mode. Wait
about 2-3 seconds and the LED indicator will turn solid green if the PC/master device
connected to functions properly. To turn off the touch monitor, users just need to press
the power button once.
The relationship between the power indicator and the touch monitor is as follows:
Indicator status
Solid red
Solid green
2.1.2 Touch
The touch monitor is factory calibrated and does not require manual calibration.
2.1.3 Video
Generally, the image displayed on the touch monitor looks the best when the output
resolution of the PC/master device matches the resolution of the touch monitor.
In most cases, the touch monitor will not require video adjustments. For output videos at
non-native resolutions, users can use the OSD control keys to select the resolution scale
that suits the native resolution of the touch monitor.
TMC Series | User Manual
OFF
13
Touch monitor status
OFF
SLEEP
WORKING
www.vantrontech.com