Table of Contents
Advertisement
Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions
Precautions for Power Cables and Accessories
Use proper power source only. Make sure the supply voltage falls within the specified
range.
Place the power cable properly at places without extrusion hazards.
Cleaning instructions:
Power off before cleaning the Product
•
•
Do not use caustic or aggressive liquids, vapor, or spray
Clean with a damp cloth
•
•
Do not try to clean exposed electronic components unless with a dust collector
Power off and contact Vantron technical support engineer in case of the following faults:
•
The Product is damaged
The temperature is excessively high
•
•
Fault is still not solved after troubleshooting according to this manual
Do not use in combustible and explosive environment:
•
Keep away from combustible and explosive environment
Keep away from all energized circuits
•
•
Unauthorized removal of the enclosure from the device is not allowed
Do not change components unless the power cable is unplugged
•
•
In some cases, the device may still have residual voltage even if the power cable is
unplugged. Therefore, it is a must to remove and fully discharge the device before
replacement of the components.
TMC Series | User Manual
4
www.vantrontech.com
Advertisement
Table of Contents
