Table of Contents
Advertisement
Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions
1.5 Mounting & Wiring
Before you proceed with the configuration of the Product, follow the steps below to finish
hardware connection.
1. Mounting:
Four models are currently available in Vantron TMC series medical-grade touch
monitors (TMC156, TMC 190, TMC 215, TMC270). Such touch monitors are designed
to be mounted onto a variety of stands, arms, walls or medical charts with the VESA
patterns on the back, which comprise 75mm x 75mm and 100mm x 100mm.
2. Connect the video input interface of the touch monitor and the video source with the
HDMI/VGA/DP cable(s);
DP port is exclusive for TMC215 & TMC270. The display cable shall vary with the
interface to be connected, and adapter connectors are sometimes needed.
TMC Series | User Manual
VGA cable
HDMI cable
10
Drawing for illustration only.
The VESA pattern on TMC156
is 75mm x 75mm.
Screw specification:
• M4 screws
•
Thread depth: 8mm
DP cable
www.vantrontech.com
Advertisement
Table of Contents
