Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions
2.1
Operation
This section is going to brief on the settings of the touch monitor and how to troubleshoot
the device in the event of a trouble/failure. Since TMO07-DV and TMO101-DV do not offer
OSD and related functions, this chapter may not apply to these models.
2.1.1 Power
When a 12V DC power supply is plugged into the power jack of the Product, the power
indicator will turn solid red and get into the sleep mode. Wait about 2-3 seconds and the
LED indicator will turn solid green if the PC/master device connected to functions properly.
To turn off the touch monitor, users need to press the OSD power button once.
The relationship between the power indicator and the touch monitor is as follows:
Indicator status
Solid red
Solid green
2.1.2 Touch
The touch monitor is factory calibrated and does not require manual calibration unless
the input video is not fully scaled to the native resolution.
2.1.3 Video
Generally, the image displayed on the touch monitor looks the best when the output
resolution of the PC/master device matches the resolution of the touch monitor.
In most cases, the touch monitor will not require video adjustments. For output
resolutions at non-native resolutions, users can navigate to settings and select the
resolution scale that suits the native resolution of the touch monitor.
TMO Series | User Manual
OFF
13
Touch monitor status
OFF
SLEEP
Working
www.vantrontech.com