Installation & Connection - Vantron TMO Series User Manual

Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions
1.5 Installation & Connection
Before you proceed with the configuration of the Product, follow the steps below to finish
hardware connection.
1. Installation:
• Side mount
Use the mounting brackets and screws to install the touch monitor to the desired place,
and secure the screws;
• VESA mount
Vantron offers two VESA patterns on the back of the touch monitor: 75mm x 75mm
and 100mm x 100mm.
2. Connect the video connectors of the touch monitor and the video source with the
HDMI/VGA/DP cable(s);
TMO Series | User Manual
Drawing for illustration only.
Number of the brackets depends
on the product model.
Screw specification:
• M3 screws
• Thread depth: 6mm
Drawing for illustration only. The
VESA pattern on TMO101 is
75mm x 75mm.
Screw specification:
• M4 screws
• Thread depth: 8mm
10 www.vantrontech.com