Quick Setup - RCA RTB1016OM User Manual

Quick Setup

When turned on for the fi rst time or after resetting
it to the factory default, the Quick Setup menu will
pop up as following.
Would you like to do Quick Setup?
Yes
Follow the below steps to make the basic settings for
using the Blu-ray player.
1. Press OK to perform Quick Setup.
• To exit Quick Setup, press
"No" and then press OK.
The display for Player Menu Settings selection
appears.
Player Menu Settings
English
French
Spanish
Next
2. Press or button to select English, French or
Spanish and press OK.
3. Press button to select "Next" and press
OK, then the display for Resolution selection
appears.
Resolution
HDMI Auto
1080p
1080i
720p
480p
480i
Next
No
button to select
Return
Return
EN-13
4. Press or button to select HDMI Auto, 1080p,
1080i , 720p, 480p or 480i and press OK.
(For details about the Resolution, please see page
21.)
5. Press button to select "Next" and press
OK, then the display for TV Aspect selection
appears.
TV Aspect
16:9 Wide
16:9 Pillarbox
4:3 Pan and Scan
4:3 Letterbox
Next
6. Press or button to select 16:9 Wide, 16:9
Pillarbox, 4:3 Pan and Scan or 4:3 Letterbox and
press OK.
(For details about the TV Aspect, please see page
21.)
button to select "Next" and press OK.
7. Press
The display for "Quick Setup complete" appears
and press OK to exit the setup.
Notes
• You can restore the settings to the factory
settings (see page 24).
• You can run Quick Setup again from "Quick
Setup" in "Settings" (see page 25).
Return