RACCEWAY MONA User Manual page 52

d) Use cleaning agent to clean the painting plastic parts surface and wipe up by cloth.
Brake inspection:
Front and rear hub brake main checking points:
1. Press the connecting link (1), screw the adjustable nut (3), at the same time holding the brake handle (2) and lead
the brake lever achieved braking distance at 1/3-1/2,. Let the rear brake shoes attached well to the brake tray. Press
the brake levers and when it reached the braking efficiency, tighten the adjustable nut.
2. The best distance for brake shoes and hub tray is 1.5mm.
3. Replace brake shoes when the usage surface has reached 1/2.
Charger inspection:
1. Use only special or original charger. Difference country may use difference charger. Do not mess-up 220V and 110V
charger.
2. The Power Switch Lock must be in the
3. Do not up side down the battery box during charging.
4. Check the charger socket if the welding work still in good condition.
Motor and controller maintenance:
1. During raining season, do not let the water go over the motor centerline. This is to protect motor from burnt
and broken.
2. Do not press both brake lever and accelerator when starting the motor to prevent damaging other parts.
3. Slow down the scooter when the road condition is not good. High librations will interrupt the electrical parts
position when the electric bike is being charged.
33