Playing Back Tapes With Digital Effects - Sony Digital Handycam Digital 8 DCR-TRV240 Operating Instructions Manual

Playing back tapes with digital effects

During playback, you can process a scene using the following digital effect functions:
STILL, FLASH, LUMI. and TRAIL.
(1) In the playback mode, press MENU to display the menu settings.
(2) Turn SEL/PUSH EXEC dial to select D EFFECT in
(3) Turn SEL/PUSH EXEC dial to select the desired digital effect mode, then press
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
To cancel the digital effect
Set D EFFECT to OFF in the menu settings.
Notes
•Digital effect functions work only for tapes recorded in the Digital8
•You cannot process externally input scenes using digital effect functions.
•You cannot record images on a tape on your camcorder when you have processed the
image using digital effect functions. However, you can record images on a "Memory
Stick" (except DCR-TRV240) (p. 135, 142), or on a VCR using your camcorder as a
player.
Pictures processed by digital effect functions
Pictures processed by digital effect functions are not output through the DV IN/OUT
jack.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function is automatically canceled.
64
the dial.
The bars appear on the screen.
In the STILL or LUMI. mode, the picture is captured and is stored in memory
as a still image at the time you press the SEL/PUSH EXEC dial.
For details of each digital effect function, see page 48.
MENU
2
MANUAL SET
D EFFECT
OFF
ST ILL
FLASH
LUMI.
TRAIL
[ MENU ] : END
, then press the dial.
4
MANUAL SET
D EFFECT
LUMI. I I I I I I I I • • • • • • • •
[ MENU ] : END
system.