Table of Contents
Advertisement
Using the PROGRAM AE function
(1) In CAMERA or MEMORY (except DCR-TRV240) mode, press MENU to
(2) Turn the SEL/PUSH EXEC dial to select PROGRAM AE in
(3) Turn the SEL/PUSH EXEC dial to select the desired mode.
To cancel the PROGRAM AE function
Set PROGRAM AE to AUTO in the menu settings.
Notes
•Because your camcorder is set to focus only on subjects in the middle to far distance,
you cannot take close-ups in the following modes:
– Spotlight
– Sports lesson
– Beach & ski
•Your camcorder is set to focus only on distant subjects in the following modes:
– Sunset & moon
– Landscape
•The following functions do not work in the PROGRAM AE mode:
– Color Slow Shutter
– Slow shutter
– OLD MOVIE
– BOUNCE
•While setting NIGHTSHOT to ON, the PROGRAM AE function does not work. (The
indicator flashes.)
•The PROGRAM AE function does not work in the Color Slow Shutter mode.
If you are recording under a discharge tube such as a fluorescent lamp, sodium
lamp or mercury lamp
Flickering or changes in color may occur in the following modes. If this happens, turn
the PROGRAM AE function off.
– Soft portrait
– Sports lesson
52
display the menu settings.
dial.
MENU
2
MANUAL SET
PROGRAM AE
AUTO
P EFFECT
SPOTLIGHT
D EFFECT
PORTRAIT
FLASH MODE
SPORTS
FLASH LVL
BEACH&SKI
N. S LIGHT
SUNSETMOON
AUTO SHTR
LANDSCAPE
RETURN
[ MENU ] : END
, then press the
Advertisement
Table of Contents
