Table of Contents
Advertisement
Viewing images recorded on "Memory Stick"s on your computer
Viewing images on Macintosh
QuickTime 3.0 or newer must be installed to play back moving pictures in Macintosh
environment.
(1) Turn on your computer and allow Mac OS to load.
(2) Insert a "Memory Stick" into your camcorder, and connect the AC power
(3) Set the POWER switch to MEMORY.
(4) Connect one end of the USB cable to the
(5) Double click the newly recognized icon on the desktop.
(6) Select and double-click the desired image file from the folder.
Desired file type
Still image
Moving picture*
* Copying a file to the hard disk of your computer before viewing it is recommended. If
you play back the file directly from the "Memory Stick," the image and sound may
break off.
Unplug the USB cable or eject the "Memory Stick"
To unplug the USB cable or eject the "Memory Stick", follow the procedure below.
(1) Close all running applications.
(2) Drag and drop the "Memory Stick" icon to the Trash or select Eject under the
(3) Unplug the USB cable or eject the "Memory Stick." Set the POWER switch of
For Mac OS X (v10.0) users
Shutting down your computer, then unplug the USB cable or eject the "Memory Stick".
162
adaptor to your camcorder and then to a wall outlet.
other end to the USB connector on your computer.
USB MODE appears on the screen of your camcorder.
The folders inside the "Memory Stick" are displayed.
Make sure that the access lamp of the hard disk is not lit.
Special menu.
your camcorder to OFF(CHG).
Double-click in this order
t "100msdcf" folder t Image file
"Dcim" folder
"Mssony" folder t "Moml0001" folder t Image file*
(USB) jack on the camcorder and the
Advertisement
Table of Contents
