Scotsman Prodigy ELITE A Series Installation And User Manual page 20

MC0322 through MC1030
Air and Water Cooled User Manual
Cleaning, Sanitation and Maintenance Continued
Sanitize:
13. Push and release the Clean button. The yellow
Clean light will blink and the display will show C.
The machine will go through a harvest cycle, drain
the reservoir and begin to refill it.
14. Observe code display, when it blinks the
characters "A d 1" immediately go to the next
step.
15. Pour the previously prepared sanitizing solution
into the reservoir until it is full. The unit will circulate
the sanitizer, then drain and flush it. This will take
35 minutes, then the machine will stop and the
display will show O.
16. Remove all ice from storage bin or dispenser and
sanitize bin or dispenser with remaining sanitizing
solution while machine completes sanitizing cycle.
Pour excess sanitizer down drain.
Finish Cleaning Process:
17. Reinstall evaporator cover and front panel (with
air filter(s) if applicable) in their original positions.
18. Push and release the "ON" button to resume ice
making.
Want more guidance?
Scan QR Code to download the Scotsman ICELINQ®
App to connect to this machine via Bluetooth® and
access the self-guided cleaning process.
Additional maintenance:
Air filter (air-cooled models)
Clean air filters when they become visibly dirty. They
will need cleaning more often than the other items.
1. Pull air filter(s) from the front panel.
2. Wash the dust and grease off the filter.
3. Return it to its original position.
Do not operate the machine without the filter in place
except during cleaning.
Condenser (air-cooled models)
If the machine has been operated without a filter the
air cooled condenser fins will need to be cleaned.
They are located under the fan blades. The services
of a refrigeration technician will be required to clean
the condenser.
Exterior panels
The front, top and side panels are durable stainless
steel. Fingerprints, dust and grease will require
cleaning with a good quality stainless steel cleaner.
Note: If using a sanitizer or a cleaner that contains
chlorine on the panels, after use be sure to wash the
panels with clean water to remove chlorine residue.
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were replaced
or for the pressure on the gauge. Change cartridges
if they've been installed more than 6 months or if the
pressure drops too much when the ice machine fills
with water.
June 2022
Page 19