Table of Contents
Advertisement
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
TABLET DETERGENT (All-in-one)
This setting allows you to optimize the performance of the
program according to the type of detergent used.
Press the TABLET DETERGENT button (the corresponding
symbol will light up) if you use All-in-one detergents in
tablet form (rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should
be off.
MULTIZONE
If there are not many dishes to be washed, a half loading may
be used in order to save water, electricity and detergent.
Select a compatible program (see PROGRAMS TABLE) and then
press the MULTIZONE button: the symbol of the chosen rack
will appear on the display:
(only lower rack selected)
(only upper rack selected)
(only cutlery rack selected)
By default the appliance washes dishes in all racks.
Option is OFF.
TURBO
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels.
Select a compatible program (see PROGRAMS TABLE),
press the TURBO button and the indicator light will switch on.
To deselect the option, press the same button again.
POWER CLEAN®
Thanks to the additional power jets this option provides a more
intensive and powerful wash in the lower rack, in the specific
area (see page 6 POWER CLEAN IN LOWER RACK). This option
is recommended for washing pots and casseroles. Select a
compatible program (see "Programs table"), press this button
to activate POWER CLEAN (the indicator lights up).
START DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
DELAY button (repeatedly) to delay the start of the program.
Adjustable from 0:30 to 24 hours. When 24 hours is setting
has been reached, press the START DELAY another time to
deactivate the START DELAY function.
2. Press the START button and close the door within 4 sec. the
timer will begin counting down.
3. Once this time has elapsed, the indicator light switches off
and the program begins automatically.
The START DELAY function cannot be set once a program
has been started.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
OPERATION INDICATOR
A LED light projected on the floor indicates that the dishwasher
is working.
The light stays on during the cycle and switches off at the end
of the cycle.
This feature is active by default, but it is possible to deactivate
it in the "SETTINGS MENU".
Note: If NaturalDry is active and it opens the door, then
Operation Indicator will not flash at the end of cycle.
NaturalDry
NaturalDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe to
your kitchen furniture, thus door will not be opened when the option
of SANI RINSE or TURBO are on.
As additional steam protection, special designed protection foil is added
together with the dishwasher. To see how to mount protection foil please
refer to (INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding P
button (6 sec).
2. You are currently in Light Control Menu (please refer to OPERATION
INDICATOR description), if you don't want to change anything
please press and hold P button (3 sec).
3. You switched to NaturalDry Control Menu, you could change status
of NaturalDry functionality by pressing P button:
E
d
– enabled
– disabled
To confirm the change and exit from the Control Menu please press
and hold P button (3 sec).
EN
5
Advertisement
Table of Contents
