Table of Contents
Advertisement
PROJECTOR INSTALLATION
Installation Method
The projector can be hanged on the ceiling with special hanger frame, and placed on the stable
desk to to project the image according to the operating environment and requirement. In
additional the projector can be installed as following methods:
CD Ceiliing/front projection
(2) Desk/front projection
Install on the ceiling
A Contact a professional installer for the projector ceiling mounting;
B.Please ensure that the screws used for ceiling mounting are of high quality and the length is
enough to prevent the projector from falling;
C.Please purchase an universal projector ceiling mount;
D.Remove the four rubber pads on the bottom of the projector, you will see the screw holes and
use the M5*11 mm screws for installing the ceiling, and then install it.
Warning:
1. The projector may be damaged beyond repair if it is incorrectly
mounted on a ceiling or on a surface.
2. The recommended ambient temperature range is 41 'F - 95
'F.The incorrect temperature may lead to the device malfunction.
3. Please do not place the projector in wet, moist, or dusty conditions
to prevent electric shock or malfunction.
4. Poor ventilation can be a significant cause of overheating. It could
cause a projector to be damaged.
m
@ Ceiliing/rear projection
@ Desk/rear projection
-06-
support@dbpowershop.com
Advertisement
Table of Contents
