Table of Contents
Advertisement
About the Direct/Standby Power On Option
Direct Mode: When the projector is powered on, the power will be automatically turned on.
Standby Mode: When the projector is powered on. you need to press the button on the remote or
projector to tum on the projector.
SINGLE LINES CONNECTION
DBPOWER RD828 projector has 6 interfaces, HDMI
ports*2/USB ports*2/3.5mm headphone output/ AV
output. Please select the correct connecting port to
connect your device(PC. Phone. DVD Player. Sound
bar. USB. PS4, etc. )
1.Connect the use Disk
1 )Insert the U disk into either of two usb input ports;
2)You can directly enter the start-up screen on the home page, select the
option[Movie/Music/Photo/Oflice Suite]
3)Select the desired file (or folder to enter the sub folder) in the USB disk, then press the [OK]
button to play it.
2.Connect the Devices via the HDMI ports
1 )Connect your lV stick or laptop to any HDMI port of the projector;
2)Enter the home page to select the corresponding HDMI 1 or HDMI 2 as the signal source.
3.Connect to the DVD Player
Use the 3-in-1 AV cable in the package.
1 )Tum on your DVD player and the projector;
2)Connect the colorful female connectors to your DVD player· s RCA cable with 3-in-1 AV cable
in the package.
3)Connect the black connectors to AV port of the projector, enter the home page to select [A VJ
as the signal source.
m support@dbpowershop.com
-16-
Advertisement
Table of Contents
