Table of Contents
Advertisement
Step3 : Keep pressing the OK button on the remote control or projector to select the point.
Step4: Press the arrow keys on the remote or projector to adjust the horizontal or vertical
parameters. until the projection screen becomes the desired rectangle .
■
ji : Keep pressing the OK button on the remote control or the projector.
1jijijij.j,jj
p
until the positioning icon appears at the point desired, then release the button immediately.
■
N+MMM
: Press the arrow keys on the remote control or projector to adjust the
Horizontal or Vertical parameters.
GIB:
Press the keys on the remote control to back to home page.
E!ln:
Press the keys on the remote control to restore the original parameters.
INTERFACE OPERATING INSTRUCTIONS
How to Connect to WiFi
Select the 'Settings" icon in the upper -right comer of the main interface, press the "OK" key on
the remote control to enter the settings interface, and select the "WiFi Setting" sub-menu.
Select the WiFi you want to connect to in the list below. Enter the password to complete the
connection.
0Home
'='
HDMl1
'='
HDMl2
( 0
iOS Cas9 (
-------� �-------
-09-
m
••
'
SJ
support@dbpowershop.com
Miracast)
Advertisement
Table of Contents
