Advertisement
4. Assemble Door
Attach the hinges to the door and door frame using M4 flat head 12mm screws and
nuts. There will be some play in the hole size so that you can adjust the door to swing
freely.
Attach the door knob by first inserting the square M4 nut into the slot. Use a 16mm
cap head screw to attach the door.
Attach the strike plate by first attaching the adhesive
rubber backing to the acrylic. The black square strike
plate should then fit snuggly over the backing. If there
is slippage, bent the strike plate in slightly.
The front should now look like the picture below.
Copyright 2020 3DUPfitters LLC
9
Advertisement
