Advertisement
Note there are also mid-panel connectors on the top and left
and right sides of the door frame. These should be attached
using M4 cap head 12mm screws.
3. Assemble Latch Mount
Locate the magnetic latch and use the wood
screws to attach it to the latch mount. Hand
tighten and make sure its secure, but do not
over tighten or the screws may strip. The latch
can be later adjusted front-to-back to make sure
the door is flush with the door frame.
The assembled latch mount is attached to
the door frame via two M4 12mm cap head
screws at the bottom of the door frame as
shown to the right.
Copyright 2020 3DUPfitters LLC
8
Advertisement
