Advertisement
Don't Panic If You See This!
If you can't see through the plastic, please don't
panic! What you're seeing is just the plastic or paper
protective covering.
When plastic sheets are manufactured they are covered
by either a paper (brown colored) or plastic (white)
covering to protect against scratches. Follow the
directions below to remove the cover and discover the
beautiful plastic underneath.
To remove the covering from an acrylic panel, lay the
panel flat on a table. Then peel up a corner of the
covering and CAREFULLY and SLOWLY pull
horizontally to the sheet to reduce the lateral forces
that would bend the acrylic. This video shows just
what to do.
Type to enter a caption.
Copyright 2020 3DUPfitters LLC
4
Advertisement
