Table of Contents
Advertisement
Instructions Pertaining to Risk of Electrical Shock, Fire, or Injury to Persons
WARNING
WARNING
WARNING
CAUTION
Safety Statements
• Refrigerant compressors must be employed only for their intended use.
•
install, commission and maintain this equipment.
•
• All valid standards and codes for installing, servicing, and maintaining electrical and
refrigeration equipment must be observed.
© 2011 Emerson Climate Technologies
Printed in the U.S.A.
Application Engineering
B
U
L
ELECTRICAL SHOCK HAZARD
• Failure to follow these warnings could result in serious personal injury.
• Disconnect and lock out power before servicing.
• Discharge all capacitors before servicing.
• Use compressor with grounded system only.
• Molded electrical plug must be used when required.
• Refer to original equipment wiring diagrams.
•
PRESSURIZED SYSTEM HAZARD
• Failure to follow these warnings could result in serious personal injury.
• System contains refrigerant and oil under pressure.
• Remove refrigerant from both the high and low compressor side before
removing compressor.
•
• Never install a system and leave it unattended when it has no charge,
a holding charge, or with the service valves closed without electrically
locking out the system.
• Use only approved refrigerants and refrigeration oils.
• Personal safety equipment must be used.
BURN HAZARD
• Failure to follow these warnings could result in serious personal injury or
property damage.
• Do not touch the compressor until it has cooled down.
• Ensure that materials and wiring do not touch high temperature areas of
the compressor.
• Use caution when brazing system components.
• Personal safety equipment must be used.
COMPRESSOR HANDLING
• Failure to follow these warnings could result in personal injury or
property damage.
• Use the appropriate lifting devices to move compressors.
• Personal safety equipment must be used.
L
E
T
3
I
N
AE8-1384 R1
Advertisement
Table of Contents
