Table of Contents
Advertisement
SITE REQUIREMENTS AND INSTALLATION INSTRUCTIONS
3
Site Requirements
3.1
The Right Location
The right location for the BRU1 is where the following conditions can be met:
•
Environmental requirements
•
RF environment requirements
•
Maintenance requirements
3.2
Environmental
The unit shall be located in a well-ventilated area protected from extreme
temperature fluctuations, dust and water. The unit shall also be protected against
direct sunlight. To allow proper airflow around the unit, please follow the
recommendation in this chapter.
3.3
RF Environment
The unit shall be located in a position where good radio coverage can be
provided. For safety reason it is important that users cannot touch the antenna
or approach the antenna near field. If another antenna than the delivered is used,
please keep in mind that the BRU1 is an indoor equipment only. Do not mount
the antenna outdoor, where it can be exposed to lightning.
Warning:
To satisfy the FCC RF exposure requirements for base station
transmitting devices, a separation distance should be maintained
between the antenna of this device and persons during device
operation as described in Node Hardware Library/BRU1/Safety
Instructions. Changes or modifications violating these
instructions can void the user's authority to operate the
equipment.
Note:
The equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
BRU1 MANUAL, Doc.no: b1sitreq Uen Rev PA5, 2004-02-19
5 (28)
Advertisement
Table of Contents
