Site Cell Configurations (Scc) - Ericsson RBS 2207 Product Description

RBS 2106 and RBS 2206
In the figure above, Ant S1 and Ant S5 represent the antenna sharing signal
which goes to the next cabinet. For connector numbers, see Table 16 on
page 41.
Characteristics
Number of CDUs
Frequency band
Max. number of TRXs
Number of feeders
Number of antennas
Antenna configuration
TMA configuration (optional)
Note:
Table 16 Configurations with 1 x 12 CDU-G with HCU
Antenna TMA
No. (TMA
Config. Only)
TX/RXA 1
TX/RXB 5
6

Site Cell Configurations (SCC)

This section shows SCCs in one RBS. More RBSs can be combined to form
larger configurations at a site. Possible expansions, where different RBSs are
connected using TG-synchronisation, are described in Section 7 on page 50.
The following SCCs are supported by the RBS:
•
•
EN/LZT 720 0318 Uen R5A
The ASU is optional equipment.
Antenna Sharing
Connector
(Co-siting Only)
1
5
Specified basic radio configurations
The RBS with any number of dTRUs within the specified range inserted in
the specified position order
3
GSM 800
P-GSM 900
E-GSM 900
12
3
3
2 x TX/RX + TX
ddTMA + ddTMA
CDU
No./Connector
1/TX/RX1
3/TX/RX1
Radio Configurations
CXU/dTRU
No./Connector
1..6/RX1
1..6/RX2
41 (62)