Compact Wireless-G USB Network Adapter with SpeedBooster
WPA2-Personal Needed for Connection
Enter a Passphrase of 8-63 characters in the Passphrase field.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
3. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect
to Network to connect to your network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 5: Using the Wireless Network Monitor.
Chapter 4: Setting up and Connecting the USB Adapter
Setting Up the Adapter with Available Networks
Congratulations! Setup is complete.
Figure 4-14: WPA2-Personal Needed for Connection
Figure 4-15: The Congratulations Screen
13