Setting Up The Adapter With Available Networks; Figure 4-10: Available Wireless Network; Figure 4-11: Secured Wireless Network Message - Linksys WUSB54GSC User Manual

Compact Wireless-G USB Network Adapter with SpeedBooster

Setting Up the Adapter with Available Networks

If you're not setting up the Adapter with SecureEasySetup, another method for setting up the Adapter is with the
available networks listed on the Available Wireless Network screen. The available networks are listed in the table
on the center of the screen by SSID.
1. Select the wireless network you wish to connect to and click the Connect button. (If you do not see your
network listed, you can click the Refresh button to bring the list up again.)
• If the selected network doesn't utilize wireless security, you will be taken directly to the Congratulations
screen. Click Connect to Network to connect to your network and configuration is complete.
• If the network utilizes wireless security, you will need to configure security on the Adapter. Proceed to the
next step below.
2. If wireless security has been enabled on this network, you will see a Secured Wireless Network message.
Click Continue and the appropriate connection screen will appear. If your network utilizes WEP (Wired
Equivalent Privacy) encryption, the WEP Key Needed for Connection screen will appear. If your network
utilizes WPA-Personal (Wi-Fi Protected Access) encryption, the WPA-Personal Needed for Connection screen
will appear. If your network utilizes WPA2-Personal encryption, the WPA2-Personal Needed for Connection
screen will appear.
Chapter 4: Setting up and Connecting the USB Adapter
Setting Up the Adapter with Available Networks

Figure 4-10: Available Wireless Network

encryption: encoding data transmitted in a network.

Figure 4-11: Secured Wireless Network Message

11