Figure 4-20: Wireless Security; Figure 4-21: Wireless Security - Wep - Linksys WUSB54GSC User Manual

Compact Wireless-G USB Network Adapter with SpeedBooster
4. The Wireless Security screen will appear. This step will configure wireless security.
If your wireless network doesn't use wireless security, select Disabled and then click the Next button to
continue. Proceed to Step 5.
Select WEP, WPA-Personal, WPA2-Personal, WPA-Enterprise, or Radius for the Encryption Method. WEP
stands for Wired Equivalent Privacy, WPA (Wi-Fi Protected Access) Personal is a security standard stronger
than WEP encryption, WPA2-Personal is a newer security standard stronger than WPA-Personal, RADIUS
stands for Remote Authentication Dial-In User Service and is utilized by WPA Enterprise as well. If you don't
want to use encryption, select Disabled.
Then, click the Next button to continue or the Back button to return to the previous screen.
WEP
WEP - To use WEP encryption, select 64-bits or 128-bit characters from the drop-down menu, and enter a
passphrase or key.
WEP Key- The WEP key you enter must match the WEP key of your wireless network. If you are using 64-bit
WEP encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit
WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal
characters are "0" to "9" and "A" to "F".
Passphrase - Instead of manually entering a WEP key, you can enter a passphrase in the Passphrase field, so
a WEP key is automatically generated. This case-sensitive passphrase must match the passphrase of your
other wireless network devices and is compatible with Linksys wireless products only. (If you have any non-
Linksys wireless products, enter the WEP key manually on those products.)
TX Key - The default transmit key number is 1. If your network's access point or wireless router uses transmit
key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box.
Authentication -The default is set to Auto, where it auto-detects for Shared Key or Open system. Shared
Key is when both the sender and the recipient share a WEP key for authentication. Open key is when the
sender and the recipient do not share a WEP key for authentication. All points on your network must use the
same authentication type.
Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the
previous screen.
Chapter 4: Setting up and Connecting the USB Adapter
Setting Up the Adapter with Manual Setup

Figure 4-20: Wireless Security

encryption: encoding data transmitted in a network.

Figure 4-21: Wireless Security - WEP

wep (wired equivalent privacy): a method of encrypting
network data transmitted on a wireless network for greater
security.
16