Connection - Linksys WGA600N Quick Installation Manual

Connection

Before you begin the installation of the Adapter, make sure your DIRECTV
Receiver and TV are on . Also make sure you can connect to the Internet
through your wireless router and computer .
A.
Plug the power adapter into the
power port of the Adapter .
B.
Plug the other end of the power
adapter into an electrical outlet .
NOTE 2:
page 8 . If you are not sure, continue to step C .
C.
Connect one end of the network
cable to the Ethernet port of the
Adapter .
2
If you have Wi-Fi Protected Setup on your router, skip to
Dual-Band Wireless-N Gaming and Video Adapter Internet Connection Kit
Connect Power to Adapter
Connect Power to Electrical Outlet
Connect Network Cable to Adapter
WET610N