Table of Contents
Advertisement
Page 25 of
45
The Card cannot access the network because it uses a different network key
than the one configured on the wireless router.
IMPORTANT: You must now set all wireless network cards/adapters to match
these settings.
Configuring your Belkin Wireless G Desktop Card to use Security
At this point, you should already have your wireless router (or access point) set
to use WPA or WEP. In order for you to gain a wireless connection, you will need
to set your Wireless G Desktop Card to use the same security settings.
Changing the Wireless Security Settings
The Belkin Wireless G Desktop Card supports the latest WPA security feature as
well as the legacy WEP security standard. By default, wireless security is
disabled.
To enable security, you will first need to determine which standard is used by the
router or access point. (See your wireless router's or access point's manual for
directions on how to access the security settings.)
[insert F5D7000-18.jpg]
Advertisement
Table of Contents
