Cisco WAE-INLN-4CG Series Manual page 20

Installing Adapters in the WAE-7326 Appliance
Figure 13 shows the cable routing for an adapter installed in the PCI riser card cage.
Figure 13 Cable Routing for the PCI Riser Card Cage
1
2
1 Riser card cage 2 SCSI cable
When you route cables, do not block any connectors or the ventilated space around any of the fans.
Caution
Make sure that cables are not routed on top of components under the PCI riser card assembly.
Make sure that cables are not pinched by the server components.
Remove the fan guide before you route the cables. Reinstall the fan guide when you complete the cable
Note
routing.
Installing the Cisco WAE Inline Network Adapter
20 OL-12480-03
Get user manuals: See SafeManuals.com