Linksys WPC55AG User Manual page 9

2. To install the Adapter, click the Install button on the Welcome screen.
3. After reading
the Warranty
Policy, shown in
Figure 5-2,
click the Next
button if you
agree, or click
the Cancel but-
ton to end the
installation.
4. Next you will choose your type of wireless network. If you will connect to
both 802.11a and 54g networks, select 5GHz + 2.4GHz. If you will connect
to only 802.11a, select 5GHz. If you will connect to only 54g, select
2.4GHz. Click the Next button to continue.
10
Figure 5-2
Figure 5-3
5. Choose a wireless mode for your network. Click the Infrastructure Mode
radio button if you want your wireless computers to network with computers
on your wired network using an access point. Click the Ad-Hoc Mode radio
button if you want multiple wireless computers to network directly with each
other.
In the SSID field, enter the SSID of your wireless network. The SSID must
be identical for all devices in the network. The default setting is linksys (all
lowercase). Click the Next button.
Figure 5-4
11