Linksys WPC55AG User Manual page 10

6. If you chose Infrastructure Mode, go to Step 7 now. If you chose Ad-Hoc
Mode, the Ad-Hoc Mode Setting screen will appear for the type of network
you're using (see Figures 5-5 and 5-6).
Note: If you chose 5GHz + 2.4GHz in Step 4 for connection to both
802.11a and 54g networks, then go to Step 6. The Adapter will auto-
matically select the best channel for you.
For the Channel setting,
the channel you choose
should match the channel
set on the other devices in
your wireless network.
Select the channel you
plan to use for your
802.11a or 54g network
from the appropriate drop-
down screen that appears.
If you want the network to
automatically choose a
channel for you, then
select Auto.
The Network Mode setting
is available only for 54g
networks. If you have
Wireless-G (draft
802.11g) and Wireless-B
(802.11b) devices in your
network, then keep the
default Network Mode set-
ting, Mixed Mode. If you
have only Wireless-G
devices, select G-Only
Mode.
Click the Next button.
12
Figure 5-5
Figure 5-6
7. Review your
settings on the
F i n a l i z e
Settings screen,
shown in Figure
5-7, before the
Setup Wizard
starts to copy
your files. Click
the Next button
to continue.
8. After the files have been successfully copied, the screen in Figure 5-8 will
appear. Click the Exit button.
Figure 5-8
Proceed to the next section, "Hardware Installation."
Figure 5-7
13