Operating Power Liftgate (If So Equipped) - Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner's Manual

NOTE:
The liftgate cannot be pulled up when you do
not open it as soon as the liftgate opener
switch is pushed. In this case, push the
liftgate opener switch again and pull up the
liftgate.
To close the liftgate, pull down until it securely
closed.
OPERATING POWER LIFT-
GATE (if so equipped)
WARNING
Make sure the power liftgate is completely
open before loading and unloading luggage.
CAUTION
Do not apply excessive force on the power
liftgate when opening or closing it. Doing so
could cause a breakdown.
NOTE:
.
The power liftgate does not operate
normally under the following conditions:
— When parked on a steep incline
3-22
Pre-driving checks and adjustments
— In strong winds
— When the power liftgate is covered
with snow
. If the battery of fuse is replaced while the
power liftgate is open, it cannot be closed
automatically. In this case, close the
power liftgate manually.
To operate the power liftgate, the vehicle must
be in the "P" (Park) position.
The power liftgate will not operate if the battery
voltage is low.
How to turn on/off the power liftgate
The power liftgate operation can be turned on or
off in the multi-information display.
When the power liftgate is turned off, power
operation is not available. When pushing the
power liftgate button on the F.A.S.T.-key, only
the liftgate latch is released.
NOTE:
.
For models with power liftgate (with
hands-free access): When washing, wax-
ing or maintaining your vehicle, placing
or replacing the body cover, or splashing
water to the area around the kick motion
sensor, turn off the power liftgate.
.
If the power open or close operation is
performed consecutively, the safety mode
activates and the operation cannot be
performed for a certain period of time. In
this case, wait for a while and then
perform the operation.