Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WIW28542EU User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 27
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
⁠   Spin programme or a
1.
programme for draining the water.
→ "Programmes", Page 28
Press Start/Reload 
2.
13.14 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
Off.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
36
.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
a The display shows
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
buttons for approx. 3 seconds.
goes out in the display.
a
⁠   3 sec.
.
⁠   3 sec.

Advertisement

Table of Contents
loading

Table of Contents