Table of Contents
Advertisement
en first time
first time
6 Before using for the
first time
Prepare the appliance for use.
first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Turn the programme selector to
1.
Drum Clean.
Close the door.
2.
Pull out the detergent drawer.
3.
Pour approx. 1 litre of tap water
4.
into compartment II.
24
Pour standard washing powder
5.
into compartment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
6.
Press Start/Reload
7.
programme.
a The display shows the remaining
programme duration.
a After the programme has ended,
the display shows: "End".
Start the first wash cycle or set the
8.
programme selector to Off to
switch off the appliance.
→ "Basic operation", Page 33
to start the
Advertisement
Table of Contents
