Table of Contents
Advertisement
ADDITIONAL SPECIFICATIONS
The TPMS set switch, located in
the glove box, can be used to
initialize the TPMS setting:
1. Adjust the tire inflation
pressure to the specified cold
tire inflation pressure level,
listed on the tire inflation
pressure label on the driver's
side door pillar.
2. Press and hold the TPMS set
switch with the ignition in the
"ON" position until the tire
pressure monitoring light blinks
slowly 3 times in the
Combination Meter.
NOTE: Initialization cannot be performed
while the vehicle is moving.
Tire pressure specification is listed on the tire
inflation pressure label located on the driver's
side door pillar.
TPMS Set Switch
Tire Inflation Pressure Label
43
Advertisement
Table of Contents
